1. Please wipe with a dry cloth or anti-static cloth to keep the charger clean
2. Do not use chemical or abrasive cleaners to avoid damage to the case
3. The charger must be protected from strong shock or exposure to high temperature and humidity
4. It is forbidden to disassemble the charger without authorization
5. The charger should be placed vertically, in a dry and ventilated environment, avoid moisture, and keep away from flammable and explosive materials
6. When the battery is fully charged, first disconnect the input AC power supply, and then disconnect the connection between the charger and the battery
7. The AC power supply must be disconnected under the condition of no one or long-term use.
8. Do not cover the charger during the charging process, and the ambient temperature should not be greater than 40 ℃
9. This charger is only for indoor use, beware of rain
10. Do not charge non-rechargeable batteries
11. The interval between two startups is not less than 10 seconds (cut off the input power)
1. The polarity of the battery cannot be reversed, otherwise, it will damage the smart charger and the battery. The intelligent charger should be installed in a special place with good ventilation, dryness, no serious dust, no corrosive gas, and no strong electromagnetic field interference. The casing should be grounded reliably (there are grounding bolts on the lower part of the rear of the box).
2. The intelligent charger is suitable for indoor and outdoor use, not for vehicle use. Water is strictly prohibited in the machine.
3. The input power supply of the intelligent charger is two-phase 380V±5%, 50HZ, and the cross-section of the input wire is not less than 62.
4. The output line should be based on the distance, choose a suitable cable, and the total voltage drop of the line should not be greater than 5%.
5. The intelligent charger is suitable for the ambient temperature of -10℃～50℃, and the altitude is less than 1000 meters. When the machine is in use, it should be more than 0.6 meters away from the surrounding wall and other obstacles that affect its ventilation and heat dissipation. It is necessary to regularly check whether the fan is running normally. .
6. When charging, plug in the battery plug first and then turn on the power supply. After charging, cut off the power first and then unplug the battery plug.
Shenzhen Depowersupply Co., Ltd has founded in 2012. “Depowersupply” means to develop and prospect the Chinese power supply industry. Depower is a national high-tech enterprise that has integrated R&D, production, and sales. Focusing on the provider of charging solutions and solar solutions. Including lead-acid& lithium battery chargers, solar controllers, and other application fields. Depower offers some of the most energy-efficient power products in the industry, including On Board Charger & Portable lithium chargers for power supplies with an efficiency of over 94%.If you are in need of forklift chargers, please do not hesitate to contact us.
