PC48100 48V 100Amp industrial 6KW Lithium battery charger
PC48100 48V 100Amp industrial 6KW Lithium battery charger
PC48100 48V 100Amp industrial 6KW Lithium battery charger
PC48100 48V 100Amp industrial 6KW Lithium battery charger
PC48100 48V 100Amp industrial 6KW Lithium battery charger
PC48100 48V 100Amp industrial 6KW Lithium battery charger

PC48100 48V 100Amp industrial 6KW Lithium battery charger

Nominal Output Voltage:
48V
Max. Output current:
Battery Type:
AC Plug:
Share this:
PC48100 48V 100Amp industrial 6KW Lithium battery charger
PC48100 48V 100Amp industrial 6KW Lithium battery charger
PC48100 48V 100Amp industrial 6KW Lithium battery charger
PC48100 48V 100Amp industrial 6KW Lithium battery charger
PC48100 48V 100Amp industrial 6KW Lithium battery charger
PC48100 48V 100Amp industrial 6KW Lithium battery charger

01Overview

The PC48120 is a single-phase battery charger with a capacity of up to 6 kW and can charge 5.12kWh Li-Ion battery within 1 hour.The charger can be powered by most commonly existing mains voltages.

 

PC48120 is equipped with multiple protection functions, ensuring safer and more efficient charging of the battery pack. Additionally, PC48120 supports RS485/CAN communication interface.RS-485 and CAN bus are very similar in physical characteristics, and both adopt differential signal transmission mode, which has the advantages of strong anti-interference ability and high reliability.Therefore, equipped with RS485 or CAN communication makes PC48120 more suitable for commercial and industrial use.

 

Features:1.PC48120 charging current - adjustable from 0A-120A;2.Capable of charging a 5.12kWh battery in ~1 hour;3.Battery Voltage: 48V nominal;4.Single phase input is available;5.Additional protection provided by a built-in breaker;6.Input Cable: 2M length;7.Output Cable: 3M length

02Video

03Spec

Item Model name PC48120/PC48100
Battery type Lead acid/Lithium batteries
Working voltage 85V AC~264V AC
Input Frequency 45Hz~60Hz;  Rated value 50Hz≤32A
Rated input current ≤32A
Power factor ≥0.99 (100% Load)
Output Output voltage 41.5V DC~58.5V DC
Max. Output current 120A(190V AC~265V AC) 
60A(90V AC~185V AC)
Output power 6400W (174V AC~264V AC)
Voltage regulation accuracy ≤±1%Vo
Working Temp. -20°C~+55°C, >40°C Derating
Working humidity 0%~90% (Non-condensing)
Others Efficiency ≥92.5% @220V AC,50-100%
 Load(Highest over 94%)
Communication RS485/CAN
Dimensions 352mm×184mm×280mm
Weight 12.5kg
Indicator state Steady on Green light flashing
Charging Steady green light
Fault Steady red light

04Optional Wire

Input connector

a)AC plug

b)DC plug(Andersen)

c)RS485/CAN communication

05Mechanical Drawing

PC24 series

06Certificate

Depowersupply as a company with an exceptional independent R & D team, the quality of our products is excellent. Most of our products have met the requirements of UL1564, EN55014-1/2, LVD, and so on.

Software Work Registration

Preview

Patent certificate

Preview

ISO9001

Preview

CE Certificate

Preview

EMC

Preview

LVD

Preview

ROHS

Preview

ROHS

Preview

EMC

Preview

LVD

Preview

ROHS

Preview

07FAQ

Do you also do OEM or ODM products for customers? 

Yes, we could do OEM and ODM services for our customers around the world. You could forward your details demands to us via email, WhatsApp, or WeChat. 

 

What color do you have for your battery chargers?

We have silvery color which customers ordered most, and Blue, Red, Black, or other colors can be produced as per your request as well. Please kindly provide the Pantone colors you need, then we will check and confirm for you immediately.

 

How do you make it to meet IP65 waterproof?

We do full glue inside the charger, and the LED’s to be glued from the inside properly. Put the rubber gasket between the edges of the side plates and the metal case. Put epoxy glue on all external open screws. The fan outside also has IP65 waterproof certificate.

 

Did the charger has an interlock function?

If the charger is On board charger model, it has the interlock function. When the batteries are being charged (charger is being used with AC on), the electric vehicle motor, headlight, etc. cannot be used and the electric vehicle cannot move too. It is done by using the signal from the interlock.

 

If your battery charger can work for both lead acid and lithium batteries at the same time?

A battery charger can work for 1 type of battery after the factory setting. If you have both lead acid and lithium batteries, we’d like to suggest taking both lead-acid chargers and lithium chargers. Please contact our expert to advise your battery type and voltage, then we will provide the suitable one for you very soon.

 

Why can't lead-acid batteries and lithium batteries of the same voltage use the same kind of charger, such as 57.6V lead-acid batteries and 57.6V ternary lithium batteries sharing a charger

Specifically, when the charger charges a 57.6V lithium battery, and reaches the constant voltage stage of 57.6V and the current reaches 2A, the charger cut off automatically; When the charger charges a 57.6V lead-acid battery and reaches the constant voltage stage of 57.6V and the current reaches 5A, the charger switches to the float charge stage of 55.2V. If use the charger which designed for lithium batteries to charge lead acid batteries , this way will reduce the life of lead acid batteries due to the lack of floating charging 55.2v; If use the charger which designed for lead acid batteries to charge lithium batteries , this way will cause the lithium battery to not be fully charged due to the process of floating charging 55.2v. Therefore, we recommend that lead-acid batteries and lithium batteries be charged by their specially designed chargers respectively.

 

Could you explain the Precharge function? 

 Precharging is to protect the life of the battery. When the battery voltage is lower, the internal resistance of the battery is greater (the heat is more serious), and the current it can withstand is smaller. Precharging is to reduce the current when the battery voltage is low to reduce heat generation to protect the battery.

 

How many colors does the LED light(Indicator) come with? And what is the meaning of each color?

We have the LED indicator with tri colors, yellow, red and green color.

Steady Red Indicator:Charging

Steady Yellow Indicator:Almost Full

Steady Green Indicator:Full

Red Indicator Flashing:Charger failure 

1. Initially just powered on - 1S period flashes

2. The battery is reversed - 0.5S cycle flashes

3.  Output overcurrent -1S period flickering

4.  High battery voltage - 2S period flashing

5.  Low battery voltage - 3S period flashing

6.  Output voltage high - 4S period flashes

7.  Battery failure -5S period flashes

 

What is the operating & storage temperature range for this charger?

The operating temperature -20℃ ~ 50℃, storage temperature -40℃ ~ 80℃.

 

Can you make with universal input voltage 100 – 240Vac if required?

Yes, our chargers support 100-240VAC and 50/60Hz. No matter your market is European, South American, Asia or others, we are all supported.

08Product Packaging and Shipping

09Inquire

For any inquires, please fill in the following contact form.We will contact you within 1 day.

*We respect your privacy. When you submit your contact information, we agree to only contact you in accordance with our Privacy Policy.

×

Contact Us

×

Inquire

*Name
*Email
Company Name
Tel
*Message